BXQBK - WILLBOND ADHESIVE, 1300695

  • MSDS: BXQBK
  • Manufacturer: DIAGRAPH CORP
  • Product Name: WILLBOND ADHESIVE, 1300695
  • National Stock Number: 8040-00N024923
Product Identification

Product ID:WILLBOND ADHESIVE, 1300695
MSDS Date:11/20/1993
FSC:8040
NIIN:00N024923
MSDS Number: BXQBK

Responsible Party
DIAGRAPH CORP
HERRIN, IL 62948
US

Emergency Phone: 618-997-3321

Info Phone: 618-997-3321

Preparer: PETER GIMSE

Cage: IO074

Contractor
DIAGRAPH CORP
520 HERRIN, IL 62948 US

Telephone: 618-997-3321

Cage: IO074

Ingredients

(ORAL, RAT)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 0-20%

OSHA PEL N/K

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ACETIC ACID ETHENYL ESTER POLYMER WITH ETHENE;

CAS: 24937-78-8

Fraction By Weight: 20-40%

OSHA PEL N/K

ACGIH TLV: N/K


0.96 LB/GAL MINUS WATER

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE DERMATITIS AND
IRRITATION. OVEREXPOSURE MAY CAUSE DRY SKIN. EYES: MAY CAUSE
REDNESS AND BLURRED VISION. INHALATION: MAY CAUSE IRRITATION,
DIZZINESS AND FATIGUE. INGESTION: MAY CAUSE VO MITING, IRRITATION
AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. USE MILD LOTION. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. CALL MD. INHALATION: PROVIDE
FRESH AIR AND REST. CALL MD. INGESTION: DRINK SEVERAL GLASSES OF
WATER, IN DUCE VOMITING. CALL MD.

Fire Fighting

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB ON
INERT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM ALL
SOURCES OF IGNITION. DO NOT FREEZE, MAY COAGULATE AND LOSE ADHESIVE
PROPERTIES.
Other Precautions:ALL COMPONENTS OF THIS PRODUCT ARE LISTED IN THE
EPA'S INVENTORY OF CHEMICAL SUBSTANCES AS REQUIRED UNDER THE TOXIC
SUBSTANCES CONTROL ACT (TSCA).

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
RECOMMENDED.
Ventilation:NEEDED TO KEEP VAPOR CONCENTRATION BELOW TLV LEVEL.
Protective Gloves:NON-ABSORBENT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE CLOTHING AS NEEDED. OIL
RESISTANT FOOTWEAR RECOMMENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:16.5
Vapor Density:HIGHER/AIR
Spec Gravity:1.04
pH:7.5
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:WHITE LIQUID; MILD ODOR.
Percent Volatiles by Volume:75 WT

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:WATER, CARBON DIOXIDE, CARBON
MONOXIDE, HYDROCARBONS.

Disposal

Waste Disposal Methods:COMPLY WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.